1. from the number of running meters / number of rails
2. from the cross section of the rail
3. from the length of the rail

4. from color / decoration — basic shades of wood [№1-9] are included in the price; color №10 — 10% more expensive; enamel painting according to RAL — calculated individually

— from 3 to 21 working days (depending on the volume of the order and workload)

We offer 4 types of luminaires in Bleek rails:
1. Concealed LED luminaires integrated into the side of the rail.
The length of the lamp is 500-3200 mm. They are decorative and give soft reflected light.
2. We see LED lights integrated into the front of the rail.
The length of the lamp is 500-3200 mm. Can be both the main and decorative light source and give direct light.3. Independent LED luminaires installed in the gaps between the rails.

The length of the lamp is 500-2500 mm. The cross section of the lamp is from 12×16 to 50×50 mm. Can be both the main and decorative light source and give direct light.
4. Vertical LED luminaires CASCADE [Cascade], mounted on the wall between the rails or independently. The length of the lamp is 300-2800 mm. They are decorative and give backlight in the plane of the wall.

Due to the modularity and variation of the gap between the slats, it is possible to use almost all types of suspended, built-in, overhead or spotlights.

We offer 4 types of lamps in the rails of Bleek :
1. LED- is hidden lamps, rails integrated in lateral part.
Length of lamp — a 500-3200 mm Is decorative and give soft it is removed light.
2. Apparently LED- lamps, rails integrated in a forehand.
Length of lamp — a 500-3200 mm Can be as basic, and and give direct light the decorative source of light.3. Independent LED- lamps that is set in intervals between rails.
Length of lamp is a 500-2500 mm Crossing of lamp — a from 12×16 to 50×50 mm Can be as basic, and and give direct light the decorative source of light.
4. Vertical LED- lamps of CASCADE [Cascade], what set on a wall in intervals between rails or independently. Length of lamp — a 300-2800 mm Is decorative and give контрове light inplane

Завдяки модульності та варіації проміжку між ламелями можливе використання практично всіх типів підвісних, вбудованих, накладних або точкових світильників.

We have provided a special coating of the rail with moisture-proof varnish for such premises, the cost of such rails increases by 30%. However, we do not recommend direct contact with water!

Recommendations depending on the type of base:
Option 1 — load-bearing base [concrete / brick / aerated concrete, etc.]Equality / plane — difference not more than 2 mm / meter
Finishing — plaster + putty + finishing decorative covering (painting / decorative plaster (without wax))
Option 2 — light base [drywall, etc.]Equality / plane — difference not more than 2 mm / meter
Preparation — a reliable framework with a step of cross sections no more than 600 mm (based on loading from rail lamellas), a covering of GKL / GVL / MDF sheets in 1-2 layers not less than 12,5 mm thick
Finishing — plaster + putty + finishing decorative covering (painting / decorative plaster (without wax))
Additions: Adjacent structures (floor / ceiling / niches, etc.) must have the final dimensions and finish. Lighting wiring outlets as well as sockets / switches must be located in pre-designated locations.

Recommendations depending on the type of base:
Option 1 — load-bearing ceiling [monolithic reinforced concrete / prefabricated reinforced concrete floor, etc.]Equality / plane — difference not more than 2 mm / meter
Finishing — putty + decorative finish (painting / decorative plaster (without wax))
Option 2 — suspended ceiling [plasterboard / GVL / MDF]Equality / plane — difference not more than 2 mm / meter
Preparation — a reliable framework with a step of cross sections no more than 600 mm (based on loading from rail lamellas), mortgage — sheet of plywood / OSB not less than 10 mm thick, covering GKL / GVL / MDF sheets in 1 layer not less than 9, 5mm Finish — putty + decorative finish (painting / decorative plaster (without wax))
Option 3 — mounting to the load-bearing ceiling with open communications in a suspended manner
Level / plane — not required [plane and level setting is performed by adjusting the suspensions]Preparation — not required (to take into account the reliability of the foundation based on the load from the rail slats
Finishing — without finishing or according to the project (painting of ceiling space and communications in one color)
Additions: Adjacent structures (walls / niches, etc.) must have the final dimensions and finish. Lighting wiring outlets must be located in pre-designated locations. 5 mm

This is an additional MDF panel with oak veneer that attaches to the wall / ceiling, eliminates wall / ceiling irregularities and closes gaps between the rails.
The board has standard dimensions: for walls — 600×2800 mm and thickness 17 mm, for ceilings — 600×2800 mm and thickness 6-9 mm, or individual [calculated individually according to the project]Finish — shades of oak / walnut veneer [color -121-12] or enamel color according to RAL / NCS [more than 300 shades]

If sockets / switches / TVs are found in the rail installation area, some of the rails are interrupted to form a niche.
These rails are made with two veneered ends, cut in half, the parts are turned so that the veneered ends are oriented towards the socket / switch / TV bracket.